10 12 832 515
Saab 9-3 CV M04-
33 Remove the battery cover and the battery
negative cable.
34 Locate the connector with connected fibre optic
cables at the left-hand lower A-pillar (taped to
the cable duct) and lift up the connector lock tab.
35 Remove the fibre optic cable from the position in
the connector where the arrow points outwards,
to the fibre optic cable.
36 Remove the protective cover from the connection
to the kit's fibre optic cable and fit the protective
cover on the removed fibre optic cable's connec-
tion. Carefully move the fibre optic cable aside so
that it is not damaged and position it behind the
wiring harness.
37 Fit the connection on the fibre optic cable which
was fitted in step 31 in the connector and fit the
lock tab.
WARNING
The visible red light is a class 1 laser. Do not look
directly into the optical fibre or the control module
connector at close range. A distance of less than
20 mm between your eyes and the light source
may cause eye injury.
Important
Handle the fibre optic cables with care or the
signal may be distorted.
·
It is very important that the two cables in the
connector are not mixed up.
·
Do not bend the cable in a radius smaller than
25 mm.
·
Keep the cable ends free from dirt and grime.
·
The cable should not lie against any sharp
edges as this may cause increased signal
reduction.
F930A309
34
36
34
37
