OPERA
T
ION
stage accompany
R
BB35 USER MANUAL
4-6
4
4
.
.
3.
3.
4
5
High Pass Filter
Parametric Equalizer (PEQ)
EXIT
EXIT
EXIT
EXIT
EXIT
EXIT
EXIT
EXIT
MENU
MENU
MENU
MENU
MENU
MENU
MENU
MENU
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
Out 1 HighPass
Out 1 HighPass
Out 1 PEQ 5
Out 1 PEQ 5
Out 1 PEQ 5
Out 1 HighPass
Out 1 PEQ 5
Out 1 PEQ 5
Freq: 35Hz
Enabled: Off
Freq: 14500Hz
Q: 1.5
Enabled: On
Type: BES 12dB
Gain: -7.75dB
Type: BEll
Adjust the High Pass Filter frequency by turning the rotary encoder. You can switch the high
There are 10 bands of parametric equalization. Each band can be adjusted freely over the
pass filter off by turning the rotary encoder down (counterclockwise) until the frequency passes 20Hz.
complete frequency range of 20Hz to 20kHz. Adjust the frequency by dialing the rotary encoder.
Press the rotary encoder to change the filter type. Select the type by turning the rotary encoder.
Press the rotary encoder to select the parameters. The available parameters are: Frequency
You can choose from: Butterworth 6dB, Bessel 6dB, Butterworth 12dB, Bessel 12dB, Linkwitz
(20Hz to 20kHz), Gain (-12dB to +12dB), Q (0.2 to 25), Enabled (on or Off), Type (Bell, High
Riley12dB, Butterworth 18dB, Bessel 18dB, Butterworth 24dB, Bessel 24dB. Higher order
Shelff, Low Shelf, Notch, All Pass, Band Pass, High Pass, Low Pass). For the Shelving filters,
filters may be set by adding filter sections in the PEQ blocks (see below).
Enable or disable the High Pass filter by rotating the encoder between on and off.
the Q value sets the steepness of the filter in dB/Oct.
