ENTRY I NTO SERVI CE
S1NEOCYCLES -EN
11
EN
3 - SEATPOST ASSEMBLY
A - SEAT POST WITH CLAMP
(MODÈLE GX01 / GX02 / CX02 / CX1)
1- Insert the seatpost ( ) into the frame at the
level of the seat tube. (wheels carbon grease)
2- Position it according to your side, taking care
to keep a minimum measurement of 10cm in the
seat tube. (insertion )
3- Tighten the collar ( ) to the indicated torque
(see tightening table page 13)
B - SEAT POST WITH EXPANDER
(MODÈLE 490D / 590D / 699D / FP03 / FP04
1- Insert around the seatpost ( ) the gromet
( ) (rubber piece) in the high position.
2- If your bike has an internal battery (Di2), clip
the cables first.
3- Position the expander ( ) in the frame hou-
sing at the level of the seat tube. If necessary, tilt
the frame so that the part does not fall to the bot-
tom of the seat tube. If necessary, turn your bike
to retrieve the part.
4- Slowly insert the seatpost at the desired height,
making sure to keep a minimum measurement of
10cm in the seat tube. (insert - see left photo )
5- Tighten the expander to the torque indicated
on it (if necessary, see tightening table on page
13).
6- Lower the rubber grommet until it fits the
frame perfectly (depending on the bike model)
1
1
1
1
2
2
3
3
3
3
3
2
2
ASSEMBLY
