7. Install the 6” wheels using (1) 1/2"x5-1/2” hex head bolt, (2) 1/2" flat washers, and
(1) 1/2" lock washer and (1) ½” hex nut as shown in
FIGURE 9
.
8. Attach the front rubber protective pads and fully tighten all hardware.
See
FIGURE 9
.
7
SAFETY & MAINTENANCE INSTRUCTIONS
x
Do not dive or jump from any part of this guard chair.
x
Periodically inspect the VISTA to assure there are no worn
parts and that all hardware is properly tightened.
x
All stainless steel parts require periodic maintenance.
Polishing with a cotton cloth and a Windex-type product
maintains the finish and restores luster.
x
Use non-abrasive soap and water. Avoid harsh chemicals and
disinfectants. Always read the label instructions on any
cleaner carefully before applying it to a surface.
22
31
26
7
10
13
12
9
30
9
FIGURE 9