6
PROPER SLIDING POSITION
Slide users must use the sitting slide position, facing forward, feet
first as shown in
Figure 1
.
STRUCTURAL & INSTALLATION CHECKLIST
After installation and prior to the first use of the SlideAway and periodically (see DAILY/WEEKLY
MAINTENANCE OF THE SLIDEAWAY) thereafter the owner must:
1.
Inspect the runway for visible cracks or tears.
2.
Inspect the ladder for sharp edges, protrusions, cracks or tears.
3.
Inspect slide assembly for loose corroded fasteners.
4.
Measure the following dimensions and compare with the manufacturer’s placement instructions on pages
13, 14, and 15.
5.
Pool water depth at the base of the slide should be at least 3' (914 mm) deep, and at 4'6" (1372 mm) out
from slide exit, should be at least 4'6" (1372 mm) deep.
6.
The height of the slide runway exit above the water should be 20" (508 mm) maximum.
7.
The distance between the slide centerline and the edge of other pool equipment should be at least 3'6"
(1067 mm).
8.
Observe the position of the exit of the slide as shown in
Figures 8
,
9
and
10
on pages 13 and 14.
9.
Read, understand and enforce all safety and use instructions on the slide.
Figure 1
