7
ASSEMBLY INSTRUCTIONS FOR IN-DECK MOUNTING
1)
Place the slide runway upside down on a surface that will not scratch the slide.
2)
Open the ladder and parts carton and locate the ladder and the 4 legs.
3)
Insert the top of the slide ladder all the way into the two sockets in the slide.
NOTE: The top of the ladder is the end with the side rails cut square. See
Figure 7.
4)
Insert the slide legs into the leg sockets of the slide. The shorter legs go into the
sockets on the inside curve of the slide. Be sure to insert the end of the legs that
do not have the pre-drilled holes into the leg sockets. Do not attach the legs
permanently at this point. See Figure 8.
Figure 7
Figure 8