4. Install the swivel/plate assembly onto
the upper frame plate as shown in
Figure 5
. Secure it with four 1/4"-20 x
2-1/2” hex head cap screws
(item 11)
,
eight 1/4" flat washers
(item 6)
, four
1/4" lock washers
(item 7)
, and four
1/4"-20 acorn nuts
(item 9)
. Tighten all
hardware securely.
Caution: over tightening of hardware
may result in damage to the frame
tubes and could prevent secure
assembly of the lifeguard chair.
FIGURE 5
5. Return to the hardware installed in
Steps 1 and 2 and tighten securely.
Caution: over tightening of hardware
may result in damage to the frame
tubes and could prevent secure
assembly of the lifeguard chair.
6. Install the lifeguard seat
(item 17)
on
the swivel plate as shown in
Figure 6
.
Secure it with four 1/4" lock washers
(item 7)
and four 1/4”-20 hex nuts
(item 15)
. Tighten all hardware
securely.
Caution: over tightening of hardware
may result in damage to the
lifeguard seat and could cause
injury to the user.
5
FIGURE 6
