9
5.
Assemble the top ladder section and lower ladder section as shown in FIGURE E. Insert the two
button head cap screws into the threaded inserts as shown in FIGURE E.
Do not fully tighten the
screws at this point; start the screws into the threaded inserts.
Note: Be sure to apply anti-
seize to all fasteners to prevent galling.
6.
Insert the button head cap screws into the back side of the ladder as shown in FIGURE F. Tighten
the screws until snug. Go back and fully tighten the screws from Step 5.
Note: Be sure to apply
anti-seize to all fasteners to prevent galling.
7.
Insert the two carriage bolts into the steps as shown in
. Tighten the nuts onto the
carriage bolt until the lock washer is fully compressed. Note: Be sure to apply anti-seize to all
fasteners to prevent galling
FIGURE D
FIGURE E
(2)
(1)
(4)
(6)
(4)
(5)
Summary of Contents for heliX2
Page 19: ...A APPENDIX A...
Page 20: ...B APPENDIX B...
