INSTALLATION MANUAL
EDGE DIVING SYSTEM
6
srsmith.com
TABLE 3 – PLACEMENT CHART
ADDITIONALLY REFER TO: ANSI/APSP/ICC-5 2011 American National Standard for Residential Inground Swimming Pools and
to page 5 for S.R.Smith Residential Inground Pool Minimum Specifications.
NOTE:
WHEN COPING IS USED, DO NOT SET FRONT JIG BOLTS CLOSER THAN 3” FROM THE BACK EDGE OF THE COPING.
* IMPORTANT: The distance for setting the front jig bolt (S) from the water’s edge is valid only if the minimum water depth is maintained at the tip of the board noted
as point “A” in ANSI/APSP/ICC-5 2011 American National Standard for Residential Inground Swimming Pools. If minimum water depth is not maintained the distance
(S) must be adjusted accordingly.
** “WA” dimension is valid only in conjunction with the minimum depth at point “A” for type pool in accordance with ANSI/APSP/ICC-5 2011 American National
Standard for Residential Inground Swimming Pools.
IMPORTANT:
THESE DIMENSIONS ARE
ACCURATE ONLY FOR
VERTICAL POOL WALLS,
TYPICALLY GUNITE
CONSTRUCTION, WITH
LESS THAN A 3’ RADIUS
TO THE POOL FLOOR.
DUE TO THE VARYING
SIZES OF OTHER POOLS,
TYPICALLY VINYL LINER
CONSTRUCTION, PLEASE
CONTACT CUSTOMER
SERVICE FOR PROPER JIG
PLACEMENT.
1-800-737-5386
EDGE
DIVING
SYSTEM
PART #
NOMINAL
BOARD
LENGTH
ANSI/
NSPI-5
POOL
TYPE
DISTANCE FROM
WATER’S EDGE TO
FORWARD JIG BOLT
(S)
DISTANCE FROM
END OF BOARD TO
FORWARD JIG BOLT
MAX HEIGHT
OF BOARD
ABOVE
WATER
(HOW)
EDGE-BASE
6’
I
31.5”
49.5”
18”
20”
EDGE-BASE 6’
II
31.5”
49.5”
18”
20”
EDGE-BASE 6’
III
25.5”
49.5”
24”
26”
EDGE-BASE 6’
IV
19.5”
49.5”
30”
30”
EDGE-BASE 6’
V
13.5”
49.5”
36”
40”
EDGE-BASE
8’
I
EDGE-BASE 8’
II
EDGE-BASE 8’
III
44.25”
68.25”
24”
26”
EDGE-BASE 8’
IV
38.25”
68.25”
30”
30”
EDGE-BASE 8’
V
32.25”
68.25”
36”
40”
MIN.
OVERHANG
(WA)
NOT ALLOWED
NOT ALLOWED
FIG. A – EDGE FIBERGLASS BASE PLACEMENT SPECIFICATIONS:
S.R.SMITH CANNOT GUARANTEE CUSTOMER’S CONCRETE OR THICKNESS
NOTE: READ THESE INSTRUCTIONS IN THEIR ENTIRETY BEFORE ATTEMPTING THE INSTALLATION.
INSTALLATION INSTRUCTIONS
