8
Cyclone Assembly
1.
Place the upper & lower slide runway sections on the ground. Assemble and fasten as shown in
FIGURE C
.
2.
a. Attach the pedestal to the upper & lower slide sections as shown in FIGURE D in 2
locations.
b. Attach the pedestal as shown in FIGURE D in 4 locations. Mark and drill a 1/4" pilot hole
in the center of each recess before fasting with the lag screws.
3.
Attach the assembled slide runway to the ladder using the hardware shown in FIGURE E
(5)
(4)
(5)
(4)
(6)
2.a.
2.b.
(7)
(4)
(1)
(2)
(4)
(5)
(4)
FIGURE D
FIGURE E
FIGURE C
