background image

700- 5600  

Rev 

6.16.2016 

2

 

 

TABLE OF CONTENTS 

 

INTRODUCTION & PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   2  

COMPONENT DESCRIPTION & OPERATION   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   2  

ASSEMBLY & INSTALLATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3   

OPERATION & MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4   

LONG TERM STORAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5  

SPECIFICATIONS & PARTS LIST  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5   

 

 

 

 

 

 

 

 

 

 

LIST OF FIGURES 

Figure 1.  Rear Side of the Seatback, showing mounting threads................................................................ 3 

Figure 2.  View of 27” strap orientation on the Seatback. ............................................................................. 3 

Figure 3.  View of 32” strap orientation on the Seatback. ............................................................................. 4 

 

INTRODUCTION 

The purpose of this document is to provide information to the User relating to the installation, safe 

operation, care, and maintenance of the 

STABILITY STRAP ASSEMBLY. 

 

INTENDED LIFT USER 

All of S.R. Smith’s lifts have been designed to assist individuals requiring assistance entering or exiting a 

swimming pool or spa - however, the User should not exceed the weight limit of the product (300 lb/136 

kg to 400 lb/181 kg depending upon model). [It is the responsibility of the lift Owner to ensure that safety 

procedures are put in place and a risk assessment is completed.   Mental or physical disabilities may 

require assisted transfer, and the Owner is responsible for determining the number of qualified attendants 

to complete the poolside transfer and the number of persons required to be in the water, ready to receive 

and assist the User.] The correct stabilizing system (seat belt, and/or stability strap) must be attached to 

the seat and fully fastened and used during each transfer.  

 

Our goal is to provide our customers with the most advanced and innovative designs offering exceptional 

quality at affordable prices.  All of our lifts meet the specifications set forth by the Access Board - ADAAG 

2004 (US only), Medical Device Directive, 93/42/EEC, RoHS2 Directive 2011/65/EU, EN 50581:2012

 

and ISO10535:2006 including

 

repeating the lifting cycle of the hoist (lift) for a total of 11,000 cycles. The 

lift system and AC powered battery charger complies with EN60601-1-2, 2007/03. 

  

USING THE STABILITY STRAP ASSEMBLY 

Obey all User Instructions listed in this manual whenever using lift. Obey all Caution, Warning, 

Operating Instruction(s) and Labels located on the lift whenever using. 

[It is the responsibility of the 

lift Owner to ensure safety procedures are put in place and a risk assessment is completed.  Mental or 

physical disabilities may require assisted transfer, and the Owner is responsible for determining the 

number of qualified attendants to complete the poolside transfer and number of persons required to be in 

the water ready to receive and assist the User.]

  If the lift will be used by a disabled person living on 

their own, a communication device should be installed in the pool 

area to call for assistance in the event of an emergency. Only persons 

healthy enough for water activities should use the lift. Users should 

consult with their physician to determine if water activities are 

appropriate. Keep fingers and hands clear of lift arms during use.  

 

WARNING:  A SEAT BELT AND/OR STABILITY STRAP MUST BE ATTACHED TO THE SEAT AND 

FULLY FASTENED AND USED DURING EACH TRANSFER.

 

 

PRODUCT OVERVIEW

 

The Stability Strap Assembly is designed to secure the User in a S.R.Smith Lift Seat.  The unit is 

constructed of high strength 4-Panel Nylon webbing and is UV and water resistant. It may be installed 

with the integral 6” Hand Loop strap on either the left or right side of the seat.  This instruction manual 

describes installation for a right handed user to pull the strap free with their right hand.  For left hand use, 

simply switch the straps to the opposite sides of the Lift Seat. 

 

 

Summary of Contents for 900-6000-1






Reviews: