4>If only the lower limit value is not 0, the upper limit value is
not 0, and the lower limit value is greater than the upper limit
value, which means when the weighing data is greater than the
lower limit value, or less than the upper limit value, the alarm is
issued.
4
：
Counting operation
During using
，
if you want to test the members
，
long press
for 3S more when in zero state
，
it shows cn0001 means
1 piece, press to change and to move, input same
sample members
，
press to confirm.
wait for the data stabilization icon to appear, press the
button to display the number of the value
,
then back to
weighing state.
5
．
Pre-peeling operation
Put object on scale, press , it means reduced the package
weight, when the weight is 0, the tare light will show up on the
display, then put the weighed item into the package weight, and
the weight value displayed at this time is the net weight of the
item. After taking out the package and item, the weight value
will be displayed as a negative number, and then press once
6. Charging instruction
When the battery is low, the “low voltage” indicator light is on.
Please charge the battery for 12 hours before use. When
charging, ac charging indicator shows “Red”, table shows in
charging when full display “green”, can be in the display of
green light. Continue charging for 3-4 hours to ensure sufficient
battery power.
7. Date/ / time setting
Press to open and wait it show 00.00.00,press into
Date/time setting ,the first one is years, press to change,
press to move
，
press after finish
，
then comes to
second one is month, next one is day. Then press to
setting hours/minutes/seconds, same operation like below
8.
Print item name switch
In weighing
，
long press 3S
，
it shows“P 000” to
change value
，
（
Such as
：
change to third name
，
press to
6
7
