- 2 -
Turn left
Turn right
Forward
Backward
RC car user guide
Install the controller batteries
Install AA Battery (Non-Rechargeable) In the car.
Be mindful of the model version.
Install Battery pack (Rechargeable) In the car.
Be mindful of the model version.
ON/OFF
Switch
Power Indicator
Spray button
ON/OFF
Switch
Fine
tuning
ON/OFF
Switch
Fine
tuning
Loosen the screw and
removethe battery cover.
Install AA Battery.
*2×1.5V“AA”Battery
Loosen the screw and
remove the battery cover.
Install AA battery.
*6X1.5V “AA”Battery.
Loosen the screw and
remove the battery cover.
Insert 7.4V battery in the car.
*7.4V Li-ION Battery
Method for charging battery pack.
Add water to the remote to create a spray
Computer USB port
Add water to the car under the
lid at the bottom of the car
(Do not add water
directly from the tap)
Press the spray button on the
remote control to
spray cool smoke from the toy car
(Do not use this function when
there is no water to avoid damage)
USB Charger
7.4V Li-ION
Battery
How to replace rubber tire
1.Unscrew the hexagon nuts of the drift wheel on the vehicle
2.Remove hexagon nuts and wheels from vehicle
3.Install the rubber wheel into the vehicle
4.Tighten the octagonal nuts on the wheels
Note: Replacement of wheels requires adult operation
or supervision.