Indicator lights flash quickly
Matching code.
Indicator lights stay on
The frequency has matched already, can work.
Indicator Lights flash slowly
a. Has lost the signal of transmitter.
b. Entering into the low-power state.
Indicator Lights off
Entering into over current or over high-temperature protection state.
Indicator Lights flash quickly
Forward or backward.
Indicator lights states
Meanings
!
Please note, the car and the transmitter only need to be matching-code at first time, then do not
need match again in future, just turn on the car and transmitter to play.
Short Press the “ ” button to turn on/off the light of high speed car.
1. Press and hold the “ ” button as a below picture, turn on the transmitter power switch, then release
the button when the signal indicator light flash, the transmitter is in code matching state.
2. Connect the battery to the car, turn on the power switch, the indicator light of high speed car changes
from flashing to staying on, then the code is matching successfully.
Please follow below steps to re-pair the transmitter if needs.
①
Fn (CH3 Light control/Code matching)
30%
100%
20%
100%
④
ST.D/R
(Steering D/R trimmer)
If the car can’t run straightly
during driving, it can be adjusted
via this trimmer.
③
ST.TRIM
(Steering servo trimmer)
②
TH.D/R
(Throttle.D/R trimmer)
(20%-100%)
Speed (30%-100%)
-6-
