background image

5

SPECIFIC SAFETY RULES

 

During normal use the tool will recoil immediately after 
driving a fastener. This is a normal function of the tool. 

Do not attempt to prevent the recoil by holding the nailer 
against the work. Restriction to the recoil can result in 
a second fastener being driven from the nailer. Grip the 
handle firmly and let the tool do the work. Failure to heed 
this warning can result in serious personal injury.

 

Do not drive fasteners on top of other fasteners or with 
the tool at an overly steep angle as this may cause 
deflection of fasteners which could cause injury.

 

Do  not  drive  fasteners  close  to  the  edge  of  the 
workpiece as the wood may split, allowing the fas-
tener to be deflected possibly causing injury.

 

AIR SUPPLY AND CONNECTIONS

 

Do  not  use  oxygen,  combustible  gases  or  bottled 

gases as a power source for this tool as tool will ex-
plode, possibly causing injury or death.

 

Do  not  use  with  an  air  compressor  which  can  po-
tentially exceed 200 psi as tool may burst, possibly 
causing injury. 

 

The  connector  on  the  tool  must  not  hold  pressure 
when air supply is disconnected.  

If an incorrect fitting 

is used, the tool can remain charged with air after discon-
necting and thus will be able to drive a fastener even after 
the air line is disconnected, possibly causing injury.

 

Always disconnect air supply:

•  Before making adjustments
•  When servicing the tool
•  When clearing a jam
•  When tool is not in use
•  When moving to a different work area, as accidental 

actuation may occur, possibly causing injury.

LOADING TOOL

 

Do not load the tool with fasteners when any one of 

the operating controls is activated.

When loading tool: 

 

Never place a hand or any part of body in fastener 
discharge area of tool.

 

Never point tool at anyone.

 

Do  not  pull  the  trigger  or  depress  the  workpiece 
contact as accidental actuation may occur, possibly 
causing injury.

SAVE THESE INSTRUCTIONS

 

Refer to them frequently and use them to instruct others 
who may use this tool. If you loan someone this tool, loan 
them these instructions also.

Summary of Contents for YN200BN





















Reviews: