
5
Before turning on the motor, firmly hold loose end of
the hose. Turn the motor on by flipping the switch to
the “I”ON position.
Make sure that the appliance is not plugged into the
power mains.
Remove the suction hose from the tank.
Loosen the clamps and separate the upper section
from the tank.
Remove all the dirt and residue from the tank and the
hose.
Clean the foam filter by washing it with a mild
detergent.
Check the hoses and connections and check the
power cord for any damage.
When the foam filter is removed, check the float. To
do this, take the upper section by the handle and tip
it carefully so that the filter basket is facing upwards.
The float should move freely up and down. See figure
26.