Ryobi SA1202, Operator'S Manual

Page: 18 / 20

Page 18
RE
CYCLE
1
.8
00.822.88
37
R B R C
N i C d
™
MAINTENANCE
To obtain the longest possible battery life, we suggest the
following:
■
Store and charge your batteries in a cool area.
Temperatures below 50°F or above 100°F will shorten
battery life.
■
Never store batteries in a discharged condition. Recharge
them immediately after they are discharged.
■
All batteries gradually lose their charge. The higher the
temperature the quicker they lose their charge. If you
store your tool for long periods of time without using it,
recharge the batteries every month or two. This practice
will prolong battery life.
BATTERY PACK REMOVAL AND PREPARA-
TION FOR RECYCLING
WARNING:
Upon removal, cover the battery pack's terminals with
heavy duty adhesive tape. Do not attempt to destroy
or disassemble battery pack or remove any of its com-
ponents. Nickel-cadmium batteries must be recycled
or disposed of properly. Also, never touch both termi-
nals with metal objects and/or body parts as short
circuit may result. Keep away from children. Failure
to comply with these warnings could result in fire and/
or serious injury.
To preserve natural resources, please
recycle or dispose of batteries properly.
This product contains nickel-cadmium
batteries. Local, state or federal laws may
prohibit disposal of nickel-cadmium
batteries in ordinary trash.
Consult your local waste authority for information regarding
available recycling and/or disposal options
■
Open the chuck jaws and remove the hex key. Remove
the chuck screw by turning it in a clockwise direction.
See Figure 16.
NOTE: The screw has left hand threads.
■
Insert the hex key in the chuck and tighten chuck jaws
securely. Tap sharply with a mallet in a counterclock-
wise direction. This will loosen the chuck on the
spindle. It can now be unscrewed by hand.
See Figure
17.
TO RETIGHTEN A LOOSE CHUCK
See Figure 17.
The chuck may become loose on spindle and develop a
wobble. Periodically check chuck screw for tightness.
To tighten, follow these steps:
■
Lock the switch trigger by placing the direction of
rotation selector in center position. See
Figure 4.
■
Open the chuck jaws.
■
Insert the hex key into the chuck and tighten chuck
jaws securely. Tap the hex key sharply with a mallet in
a clockwise direction. This will tighten the chuck on the
spindle.
See Figure 17.
■
Open the chuck jaws and remove the hex key.
■
Tighten the chuck screw.
NOTE: The chuck screw has left hand threads.
BATTERIES
The battery pack for your tool is equipped with nickel-
cadmium rechargeable batteries. Length of service from
each charging will depend on the type of work you are doing.
The batteries in this tool have been designed to provide
maximum trouble free life. However, like all batteries, they
will eventually wear out. Do not disassemble battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry, could
result in a serious burn.