background image

Page 18

WARNING:

When servicing, use only identical replacement parts.
Use of any other part may create a hazard or cause
product damage.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc. come in contact
with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.

BATTERIES

Your saw's battery pack is equipped with nickel-cadmium
rechargeable batteries. Length of service from each charging
will depend on the type of work you are doing.

The batteries in this tool have been designed to provide
maximum trouble free life. However, like all batteries, they
will eventually wear out. 

DO NOT 

disassemble battery pack

and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry, could
result in a serious burn.

To obtain the longest possible battery life, we suggest the
following:

Store and charge your batteries in a cool area.
Temperatures above or below  normal room temperature
will shorten battery life.

Never store batteries in a discharged condition. Recharge
them immediately after they are discharged.

All batteries gradually lose their charge. The higher the
temperature the quicker they lose their charge. If you
store your tool for long periods of time without using it,
recharge the batteries every month or two. This practice
will prolong battery.

DO NOT 

abuse power tools.

 

Abusive practices can damage

tool as well as workpiece.

WARNING:

Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such alteration
or modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.

BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING

To preserve natural resources, please
recycle or dispose of properly.

This product contains nickel-cadmium
batteries. Local, state or federal laws may
prohibit disposal of nickel-cadmium
batteries in ordinary trash.

Consult your local waste authority for information regarding
available recycling and/or disposal options.

WARNING:

Upon removal, cover the battery pack's terminals with
heavy duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its components.
Nickel-cadmium batteries must be recycled or disposed
of properly. Also, never touch both terminals with metal
objects and/or body parts as short circuit may result.
Keep away from children. Failure to comply with these
warnings could result in fire and/or serious injury.

RE

CYCLE

1

.8

00.822.88

37

R B R C

N i C d

MAINTENANCE

Summary of Contents for RY6201





















Reviews: