Ryobi RWB002, Original Instructions Manual

Page: 3 / 16

Safety
1
GENERAL SAFETY RULES
WARNING
Read and understand all instructions. Failure to do
so could result in possible serious personal injury.
■ Know your accessory. Read the operator’s manual
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
accessory.
■ Take care when assembling or adjusting the workbench,
not to trap fingers or hands between the moving parts.
■ Make sure all bolts and connecting elements are firmly
tightened. Proper assembly is important to prevent the
risk of a collapse of the workbench.
■ Set up the workbench on a firm, level surface. Instability
increases the risk for personal injury.
■ Adjust the workbench, height or table angle to provide
the user with a good working posture to help prevent
strain or other injuries.
■ Do not overload. Maximum safe load is 100kg.
■ Secure all work in the vise or clamp to the workbench to
prevent it from moving whilst you work on it with hand
or power tools.
■ Always balance the load to prevent the workbench from
tipping over. If the work piece is too long, use another
means of support to balance the load. When sawing,
always consider the balance after the cut is made
before you start work.
■ Never secure any power tool or other machine to your
workbench unless the manufacturer of that device
recommends it is safe to do so. Follow any mounting
instructions very carefully. Failure to secure properly is
likely to result in serious personal injury.
■ Always read and strictly follow the instructions and
safety warnings that came from the manufacturer of
your hand or power tool when you are using it.
■ Objects, including parts of the work piece may fall from
the workbench. Wear protective foot wear to reduce the
risk of injury.
■ Do not sit or stand on top of the unit.
■ Do not use any attachments or accessories not
recommended by the manufacturer of the product. The
use of attachments or accessories not recommended
can result in serious personal injury.
■ Do not expose to rain or use in damp locations.
■ Save these instructions. Refer to them frequently and
use them to instruct others who may use this accessory.
If you loan someone this accessory, loan them these
instructions also to prevent misuse of the product and
possible injury.
INTENDED USE
The workbench is designed to secure or support material
whilst it is being worked on by hand or power tools.
Do not mount any power tool or machine which is not
specifically designed to be table mounted.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environmental-
friendly recycling.
SYMBOL
Safety alert
Please read the instructions carefully
before starting the product.
Do not reach into the gap. Beware of
pinching.
Wear eye protection
Do not exceed 100 kg.
Do not stand on top or use as ladder.
Do not sit on top.