MOUNTING THE ROUTER
18
See Figure 22
10. Position all 4 clamps on the adapter plate and tighten
securely with the 4 knobs.
11. Place the router table on its legs.
NOTE: Use a minimum of 3 clamps to secure the router
to the table.
NOTE: Routers larger than 2Hp should be mounted direct-
ly to the table top with mounting screws as described on
page 16.
NOTE: To remove the router when using the universal
clamping system, it may be necessary to disassemble one
or more of the clamps that secure the router to the table
top.
Fig. 22
Remove and replace the drop in plate
See Figure 23
Remove and replace the drop in plate in tabletop as
follows:
1. Loosen the 6 pan head screws from the top of the drop
in plate.
2. Align the drop in plate with the 6 adjustment pan head
screws so that it is flush with the upper edge of the
tabletop. Next tighten the locking nuts. For this adjust-
ment use an adjustable wrench or a combination
wrench (size 10 mm).
3. Replace the 6 pan head screws in the drop in plate and
tighten securely. Use a #2 Phillips screwdriver to keep
from stripping the screw heads.
Fig. 23
