8
ENGLISH
TROUBLESHOOTING
PROBLEM
CAUSE
ACTION
The motor does not
run
Power failure
The material to be
c h o p p e d i s n o t
drawn in
The overload protection has responded.
The material is jammed in the feeding
funnel.
The cutting blade is blocked.
Press the reset button, and press the switch
“”.
Check the power supply cable, the plug and
the house fuse.
Press the switch marked “O” to stop the motor.
Pull the material from the feed funnel. Re-
feed thick branches such that the blade does
not immediately engage the pre-cut notches
again.
Ensure that the shredder is switch off and
disconnect from the mains supply, replace the
blades.
Caution!
Allow the shredder to come to a complete standstill before changing the direction of rotation.