![background image](http://html1.mh-extra.com/html/ryobi/rpw2500wb/rpw2500wb_operators-manual_1506043009.webp)
9
ASSEMBLY
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always disconnect the engine spark plug
wire from the spark plug when assembling parts.
INSTALLING THE HANDLE BAR
See Figures 2 - 3.
Remove the acorn nuts and handle knobs from frame.
Retract handle bolts until end of bolts are flush with handle
spacers.
Install handle bar as shown. Handle bar should rest in
grooves of spacers and holes in handle bar should align
with handle bolts.
Press handle bolts through openings in handle bar.
Re-thread knobs on handle bolts and tighten to secure.
Re-thread acorn nuts on end of handle bolts and tighten
with wrench (not provided).
Place spray wand into storage clips located on the side
of handle bar.
Fig. 2
Fig. 3
ACORN
NUT
HANDLE BOLTS RETRACTED
UNTIL FLUSH WITH SPACER
HANDLE BAR
HANDLE
SPACERS
HANDLE
KNOB
SPRAY WAND
STORAGE CLIPS