Ryobi RPW190BL-G Operating Instructions Manual Download Page 5

3

 WARNING

Always turn off the mains disconnecting 

switch when leaving the product unattended.

ADDITIONAL SAFETY WARNINGS

 

Some regions have regulations that restrict 

the use of the product in some operations. 

Check with your local authority for advice.

 

Before each use, check the product for 

damage. A damaged high-pressure hose 

must be replaced. Ensure all connections, 

such as high-pressure hose and nozzle, 

are secure. Unwind the hose properly so 

they may not get twisted or kinked.

 

Do not allow children or untrained 

individuals to use the product.

 

Before starting any cleaning operation, 

close doors and windows. Clear the area 

to be cleaned of debris, toys, outdoor 

furniture, or other objects that could create 

a hazard.

 

Never pick up or carry the product while the 

motor is running.

 

Do not use the product in temperatures 

below 0°C.

 

Do not use acids, alkalines, solvents, 

flammable material, bleaches, or industrial 

grade solutions in the product. These 

products can cause physical injuries to the 

operator and irreversible damage to the 

product.

 

Always operate the product on a level 

surface.

 WARNING

High-pressure  jet  can  be  dangerous  if 

subject  to  misuse.  The  jet  must  not  be 

directed to people, animals, electrical 

devices, or the product itself.

 

Hold the trigger handle securely with both 

hands. Expect the trigger handle to move 

when the trigger is pulled due to reaction 

forces. Failure to do so could cause loss 

of control and injury to yourself and others.

 

Make sure the air in the hose and pump 

is released before you turn on the product. 

To remove the air in the hose and pump, 

connect the water supply to the pump 

using a garden hose, connect the trigger 

handle to pump using the high-pressure 

hose, disengage the trigger handle lock, 

and press the trigger until there is a steady 

flow.

 

Exercise caution to avoid slipping or falling.

 

Keep firm footing and balance.  Do not 

overreach. Overreaching can result in loss 

of balance. 

 

Only use accessories that are 

recommended by the manufacturer. The 

use of improper accessories may cause 

injury. 

 

Never leave the product running 

unattended. Turn the product off. Do 

not leave the product until it comes to a 

complete stop. 

 

Be familiar with the controls. Know how to 

stop the product and bleed the pressure 

quickly. 

 

Stay alert and exercise control. Watch what 

you are doing and use common sense. 

 

Do not use the product while tired, ill, or 

under the influence of drugs, alcohol, or 

medication. A moment of inattention while 

operating the product may result in serious 

personal injury.

 

Do not use the product if the switch does not 

turn it on and off. Any product that cannot 

be controlled with a switch is dangerous 

and must be repaired.

 

Keep a minimum distance of 30 cm when 

cleaning  vehicles.  The  high  pressure  jet 

may damage or burst vehicle tires and/or 

tire valves.

 

Use a garden hose with a maximum length 

of 15

 

m and minimum diameter of 12 mm.

 

Before each use, ensure that the accessory 

is securely attached to the trigger gun.

OVERLOAD PROTECTION

The product has an overload protection device 

that is activated when overheating or when a 

current spike occurs, automatically shutting 

down power within the product. To resume 

operation, disconnect the product from the 

power supply, wait for about 15 minutes, and 

reconnect the product to the power supply.

Summary of Contents for RPW190BL-G

































Reviews: