Ryobi RPW140SC, Original Instructions Manual

Page: 3 / 24

1
Safety, performance, and dependability have been given
top priority in the design of your electric high pressure
cleaner.
INTENDED USE
The electric high pressure cleaner is only intended for
use outdoors. For safety reasons the product must be
adequately controlled by using two-handed operation.
The product is designed for home or domestic use. It is
intended to clean machines, vehicles, buildings, tools,
facades, terraces, floors, and concrete walkways by
removal of stubborn dirt using clean water with or without
chemical detergents.
It should be used in dry, well illuminated conditions.
GENERAL SAFETY WARNINGS
WARNING
Read and understand all instructions. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
■ The product is not intended for use by persons with
reduced physical, sensory, or mental capabilities, or
lack of experience and knowledge.
■ Wear full a complete personal protective equipment
when operating the product, such as safety shoes,
heavy-duty gloves, safety helmets with visor, and
hearing protection. Use high-impact visors only with
liquid splash protection.
■ To reduce the risk of injury, keep children and visitors
away. All visitors should wear safety glasses and be
kept at a safe distance from the work area.
■ Inspect the safety devices, such as safety valves, flow
switches, and pressure switches to check if they are in
good working condition. Make sure all safety devises
are operating properly before each use.
WARNING
During use of high pressure cleaners, aerosols may
be formed. Inhalation of aerosols can be hazardous to
health.
WARNING
Depending on the application, shielded nozzles can
be used for high pressure cleaning, which will reduce
the emission of hydrous aerosols. However, not all
applications allow the use of such a device. If shielded
nozzles are not applicable for the protection against
aerosols, a respiratory mask of class FFP 2 or equivalent
may be needed, depending on the cleaning environment.
■ Always switch off the product when you leave it
unattended.
■ The product is designed for use with cleaning agent
supplied or recommended by the manufacturer.
The use of other cleaning agents or chemicals may
adversely affect the safety of the product.
■ The product uses high pressure jet which is dangerous
when misused. Do not direct the jets at persons, live
electrical equipment, or the product itself.
■ Do not spray flammable liquids.
■ Do not use the product to clean your clothes or footwear.
■ Be extra careful when opening the trigger gun. Hold the
trigger gun firmly with two hands to avoid injury when
the trigger gun kicks back.
■ High pressure hoses, fittings, and couplings are
important for the safety of the product. Use only
hoses, fittings, and couplings recommended by the
manufacturer.
CAUTION
This product must not be used on the drinking water
supply without a backflow preventer being installed.
Water flowing through a backflow preventer is considered
non-drinkable. Always observe the regulations of your
local water utility company when connecting the product
to a water supply line .
■ Do not use the product if the supply cord or other
important parts are damage, such as safety devises,
high pressure hose, or trigger gun.
■ Inadequate extension cords can be dangerous. If an
extension cord is used, it shall be suitable for outdoor
use, and the connection has to be kept dry and off the
ground. Use a cord wheel to keep the socket at least 60
mm above the ground.
■ The manufacturer recommends you connect to a power
socket protected by an RCD with a trip of 30 mA or less.
ADDITIONAL SAFETY WARNINGS
■ Some regions have regulations that restrict the use of
the product in some operations. Check with your local
authority for advice.
■ Never direct a water stream toward people or pets, or
any electrical device.
■ Before starting any cleaning operation, close doors and
windows. Clear the area to be cleaned of debris, toys,
outdoor furniture, or other objects that could create a
hazard.
■ Never pick up or carry the product while the engine is
running.
■ Do not use the product in temperatures below 0°C.
■ Do not use acids, alkalines, solvents, flammable
material, bleaches, or industrial grade solutions in this
product. These products can cause physical injuries to
the operator and irreversible damage to the product.
■ Always operate the product on a level surface. If the
engine is on an incline, it could seize due to improper
lubrication (even at the maximum lubricant level).