15
OPERATION
2
1
1
2.5m
1.65 m
2
1
2
2.0 mm
1
2
3
4
REPLACING THE LINE
1.
Remove the battery pack.
2.
Rotate the bump knob on the trimmer head
until the line on the centre of the bump knob
aligns with the arrows on the outer spool.
3.
Insert one end of a 3.4 m line through the
eyelet on the side of the trimmer head, and
push until the line comes out through the
eyelet on the other side. Continue to push
the line through the trimmer head until the
line is even in length on both sides.
NOTE:
Use a 2.0 mm diameter line.
4.
Ensure that the lines on both sides of the
trimmer head have an equal length (max.
1.65 m per side). Place the speed winder
on the bump knob. Rotate the bump knob
with the speed winder on the trimmer head
to wind the line.
NOTE:
The bump knob can also be rotated
by hand.
Summary of Contents for RLT36BS
Page 1: ...ORIGINAL INSTRUCTIONS ORIGINAL INSTRUCTIONS Cordless Line Trimmer RLT36X20 RLT36BS ...
Page 7: ...5 WHAT S IN THE BOX x 1 x 1 x 1 x 1 x 1 x 1 x 1 x 1 RLT36X20 Kit includes battery and charger ...
Page 8: ...6 WHAT S IN THE BOX RLT36BS Battery and charger sold separately x 1 x 1 x 1 x 1 x 1 x 1 ...
Page 23: ......