1
ENGLISH (Original Instructions)
Your line trimmer has been engineered and manufactured to our
high standard for dependability, ease of operation, and operator
safety. Properly cared for, it will give you years of rugged, trouble-
free performance.
GENERAL SAFETY RULES
INTENDED USE
This product is only intended for use outdoors in a well ventilated
area.
The product is intended for cutting long grass, weed and similar
vegetation at or about ground level. The cutting plane should be
approximately parallel to the ground surface. The product should
not be used to cut or trim hedges, bushes or other vegetation where
the cutting plane is not parallel to the ground surface.
WARNING
Read and understand all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious personal injury.
READ ALL INSTRUCTIONS
■
For safe operation, read and understand all instructions before
using this product. Follow all safety instructions. Failure to
follow all safety instructions listed below, can result in serious
personal injury.
■
Do not allow children or untrained individuals to use this unit.
■
Never start or run the engine in a closed or poorly ventilated
area; breathing exhaust fumes can kill.
■
Clear the work area before each use. Remove all objects such
as rocks, broken glass, nails, wire, or string which can be
thrown or become entangled in the cutting line or blade.
■
Wear eye protection which is marked to comply with BS EN166
or Australian and New Zealand Standards, as well as hearing
protection, when operating this equipment.
■
A battery operated tool with integral batteries or a separate
battery pack must be recharged only with the specified charger
for the battery. A charger that may be suitable for one type of
battery may create a risk of fire when used with another battery.
■
Use battery operated tool only with specifically designated
battery pack. Use of any other batteries may create a risk of fire.
■
Use battery only with charger listed.
MODEL
BATTERY PACK
CHARGER
RLT30CETG 130504003
720323001
■
Wear heavy, long trousers, boots, and gloves. Do not wear
loose fitting clothing, shorts, sandals, or go barefoot. Do not
wear any jewellery which hangs down.
■
Heavy protective clothing may increase operator fatigue, which
could lead to heat stroke. During weather that is hot and humid,
heavy work should be scheduled for early morning or late
afternoon hours when temperatures are cooler.
■
Never operate this unit on the operator’s left side. The product
is designed to protect the operator from heat and exhaust
fumes when on the right side of the body. Remember exhaust
fumes can kill.
■
Secure long hair above shoulder level to prevent entanglement
in moving parts.
■
Keep all bystanders, children, and pets at least 15 m away.
Bystanders should be encouraged to wear eye protection. If
you are approached, stop the engine and cutting attachment.
■
Do not operate this unit when you are tired, ill, or under the
influence of alcohol, drugs, or medication.
■
Do not operate in poor lighting.
■
Keep firm footing and balance. Do not overreach. Overreaching
can result in loss of balance or exposure to hot surfaces.
■
Keep all parts of your body away from any moving part.
■
To avoid hot surfaces, never operate the unit with the bottom of
the engine above waist level.
■
Do not touch area around the silencer or engine of the unit,
these parts get very hot from operation.
■
Always stop the engine and remove the spark plug lead before
making any adjustments or repairs except for carburettor
adjustments.
■
Inspect the unit before each use. Check for loose fasteners, fuel
leaks, etc. Replace any damaged parts before use.
■
The cutting attachment should never rotate at idle during
normal use. The cutting attachment may rotate at idle during
carburettor adjustments.
■
Mix and store fuel in a container approved for petrol.
■
Mix fuel outdoors where there are no sparks or flames. Wipe up
any fuel spillage. Move 10 m away from refuelling site before
starting engine. Slowly remove the fuel cap after stopping
engine. DO NOT SMOKE when refuelling.
■
Stop the engine and allow to cool before refuelling, performing
adjustments, maintenance or storing the unit.
■
Allow the engine to cool; empty the fuel tank and secure the unit
from moving before transporting in a vehicle.
■
Wear protective equipment and observe all safety instructions.
■
For units equipped with a clutch, be sure the cutting attachment
stops turning when the engine idles. When the unit is turned
off make sure the cutting attachment has stopped before the
unit is set down.
■
It has been reported that vibrations from hand-held tools may
contribute to a condition called Raynaud’s Syndrome in certain
individuals. Symptoms may include tingling, numbness and
blanching of the fingers, usually apparent upon exposure to
cold.
■
Hereditary factors, exposure to cold and dampness, diet,
smoking and work practices are all thought to contribute to the
development of these symptoms.
■
It is presently unknown what, if any, vibrations or extent of
exposure may contribute to the condition.
■
There are measures that can be taken by the operator to
possibly reduce the effects of vibration:
a) Keep your body warm in cold weather. When operating
