background image

2

ENGLISH

SPECIFIC SAFETY RULES

For best results, your battery tool should be charged in a location where the temperature is more than 0°C but less than 38°C.  

 

To reduce the risk of serious personal injury, do not store outside or in vehicles.

Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately 
with soap and water, then neutralise with lemon juice or vinegar. If liquid gets into your eyes, flush them with clean water for at least 0 
minutes, and seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.

SYMBOLS

  SYMBOL 

NAME 

EXPLANATION

 

Volts 

Voltage

 

Amperes 

Current

 

Hz 

Hertz 

Frequency (cycles per second)

 

Watt 

Power

 

min 

Minutes 

Time

 

~

 

Alternating Current 

Type of current

 

 

Direct Current 

Type or a characteristic of current

 

n

No Load Speed 

Rotational speed, at no load

 

 

Class II Tool 

Double-insulated construction

 

 

.../min 

Per Minute 

Revolutions, strokes, surface speed, orbits etc., per minute

 

 

Wet Conditions Alert 

Do not expose to rain or use in damp locations.

 

 

Safety Alert 

Precautions that involve your safety.

 

 

Read the Operator’s Manual 

To reduce the risk of injury, user must read and understand  

 

 

 

 

operator’s manual before using this product.

 

 

Wear Eye and Hearing Protection 

Wear eye protection which is marked to comply with ANSI Z87.  

 

 

 

 

as well as hearing protection when operating this equipment.

 

 

Keep Bystanders Away 

Keep all bystanders at least 50 ft. away.

 

 

Ricochet 

Thrown objects can ricochet and result in personal injury or  

 

 

 

 

property damage.

 

 

No Blade 

Do not install or use any type of blade on a product displaying  

 

 

 

 

this symbol.

 

Petrol and Lubricant 

Use unleaded petrol intended for motor vehicle use with    

 

 

 

an octane rating of 87 [(R + M) / 2] or higher. This product is  

 

 

 

powered by a 2-stroke engine and requires pre-mixing petrol  

 

 

 

and 2-stroke lubricant.

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these 
symbols will allow you to operate the product better and safer.

Summary of Contents for RLT30CET














Reviews: