background image

3

English (Original Instructions)

Cutting swath

432 mm

Diameter of cutting line

2.4 mm and 2.7 mm

Engine displacement

25.4 cc

Maximum engine performance
(in accordance with ISO 8893)

0.9 kW

Maximum rotational frequency 
of the spindle

12000 min

-1

Engine speed (rotational 
frequency) at recommended 
max. spindle rotational 
frequency

12000 min

-1

Engine speed (rotational 
frequency) at idle

2600-3200 min

-1

Fuel consumption (in 
accordance with ISO 8893) at 
max. engine performance

0.54 kg/h

Specific fuel consumption (in 
accordance with ISO 8893) at 
max. engine performance

0.50 kg/h

Vibration (in accordance with ISO 22867)

Right handle

 - Idle

14.9 m/s

2

 - Racing

3.7 m/s

2

- Equivalent vibration total 
value

9.3 m/s

2

Left handle

 - Idle

6.4 m/s

2

 - Racing

5.8 m/s

2

- Equivalent vibration total 
value

6.1 m/s

2

Uncertainty 1.5 

m/s

2

Noise emission (in accordance with ISO 22868)

A-weight emission sound pressure level at the 
operator's position

 - Idle

76.8 dB(A)

 - Racing

101.8 dB(A)

- Equivalent

98.8 dB(A)

A-weight emission sound power level

 - Idle

84.8 dB(A)

 - Racing

107.5 dB(A)

Use unleaded petrol intended for motor 
vehicle use with an octane rating of 91 [(R 
+ M)/2] or higher. This product is powered 
by a 2-stroke engine and requires pre-
mixing petrol and 2-stroke lubricant.

C-Tick compliance mark. Product meets 
applicable regulatory requirements.

Guaranteed sound pressure and sound 
power lever.

Full choke position

Run choke position

Set switch to "ON"

Push primer bulb

Squeeze throttle and pull starter grip

Pull: Quick release tab

The following signal words and meanings are intended 
to explain the levels of risk associated with this product.

Symbol

Meaning
DANGER:

Indicates an imminently hazardous situation, 
which, if not avoided, will result in death or 
serious injury.

WARNING

:

Indicates a potentially hazardous situation, 
which, if not avoided, could result in death 
or serious injury.

CAUTION: 

Indicates a potentially hazardous situation, 
which, if not avoided, may result in minor or 
moderate injury.

CAUTION:

(Without Safety Alert Symbol) Indicates a 
situation that may result in property damage.

SPECIFICATIONS

Weight without fuel and 
trimmer head

5.00 Kg

Weight without fuel with 
trimmer head

5.40 Kg

Fuel tank volume

620 cm

3

Summary of Contents for RLT254FCDSN












Reviews: