background image

1

Safety, performance, and dependability have 

been given top priority in the design of your 

electric line trimmer.

INTENDED USE

The product is only intended for use outdoors 

by a standing operator.

The product is designed for cutting grass, light 

weeds and other similar vegetation at or about 

ground level. The cutting plane should be 

approximately parallel to the ground surface.

The product should not be used to cut or trim 

hedges, bushes or other vegetation where the 

cutting plane is not at or about ground surface 

level.

GENERAL SAFETY WARNINGS

 WARNING

When using the product, the safety rules 

must be followed. For your own safety 

and that of bystanders, please read these 

instructions before operating the product. 

Please keep the instruction safe for later 

use.

 WARNING

This product is not intended to be used by 

children or persons with reduced physical, 

mental or sensory capabilities. Children 

should be adequately supervised to ensure 

they do not play with the product.

 WARNING

Some regions have regulations that restrict 

the use of the product. Check with your local 

authority for advice.

TRAINING

 

Never allow children or people unfamiliar 

with these instructions to use the product. 

Local regulations may restrict the age of 

the operator.

 

Read the instructions carefully. Be familiar 

with all controls and the proper use of the 

product.

 

Keep bystanders, children and pets 15m 

away from the area of operation. Stop the 

product if anyone enters the area.

 

Never use the product when you are tired, 

ill or under the influence of alcohol, drugs 

or medicine.

 

Keep in mind that the operator or user 

is responsible for accidents or hazards 

occurring to other people or their property.

ELECTRICAL SAFETY

 

Power plugs must match the outlet. Never 

modify the plug in any way. Do not use 

any adapter plugs with earthed (grounded) 

power tools. Unmodified plugs and 

matching outlets will reduce risk of electric 

shock.

 

Avoid unintentional starting. Always check 

that the switch is in Off position before 

plugging in the product to the power supply. 

Do not carry a plugged in product with your 

finger on the switch.

 

Avoid body contact with earthed or 

grounded surfaces, such as pipes, 

radiators, ranges and refrigerators. There 

is an increased risk of electric shock if your 

body is earthed or grounded.

 

Do not operate the product when there is a 

risk of lightning.

 

Do not expose the product to rain or wet 

conditions. Water entering an appliance 

will increase the risk of electric shock.

 

Electrical power should be supplied via 

a residual current device (RCD) with a 

tripping current of not more than 30 mA.

 

Before every use, examine the power cord 

for damage. If there are signs of damage, 

it must be replaced. Always uncoil the 

power cord during use, coiled cables can 

overheat.

 

If you need to use an extension cable 

ensure it is suitable for outdoor use and 

has a current capacity sufficient to supply 

your product. Check it before every use 

for damage, always uncoil it during use 

because coiled cables can overheat. 

Damaged extension cables should not be 

repaired, they should be replaced with an 

equivalent type. 

 

Do not use the product if the electric cables 

are damaged or worn.

 

If the power cord or extension cable 

becomes damaged during use, disconnect 

from the power supply immediately. Do not 

touch the electric cables until the power 

supply has been disconnected.

 

Make sure the power cord is positioned so 

Summary of Contents for RLT1238

























Reviews: