Ryobi RLT-800, Owner'S Operating Manual

Page: 10 / 16

Fig. 10
11
OPERATION
TRIMMING
1. Use the trimmer at an angle of approximately
15-degree to the working area (Fig.7) .
2. Slowly swing the trimmer from side to side. (Fig.8)
3. Do not overload your trimmer, take small “bites”
this will keep machine operating at high speed
and will greatly improve cutting efficiency,
(Fig.9)
.
4. Cutting close to a wall
Use the outside edge of the guard as a guide
when cutting close to an edge.
9
Fig. 7
Fig. 8
Fig. 9
EDGING (Fig. 10)
Rotate the rear handle to edging position, and
flip up the edge guide ( 11).