background image

Safety, performance, and dependability have been given 
top priority in the design of your electric lawn mower.

INTENDED USE

The product is only intended for use outdoors.
The product is designed for domestic lawn mowing. The 
cutting blade should rotate approximately parallel to the 
ground over which it is being wheeled. All four wheels should 
touch the ground while mowing. It is a pedestrian-controlled 
walk-behind mower designed to be pushed by hand.
The product should never be operated with the wheels off 
the ground. It should not be pulled or ridden on. It should not 
be used to cut anything other than domestic grass lawns.

GENERAL SAFETY WARNINGS

 

 WARNING

When using the product, the safety rules must be 
followed. For your own safety and that of bystanders, 
please read these instructions before operating the 
product. Please keep the instructions safe for later use.

PERSONAL SAFETY 

 

The product is capable of amputating hands and feet, 
and throwing objects. Failure to observe all safety 
instructions could result in serious injury or death.

 

Be familiar with the controls and the correct use of the 
product.

 

Never allow children or people with reduced physical, 
sensory or mental capabilities or persons not familiar 
with these instructions to operate, clean or maintain the 
product. Local regulations may restrict the age of the 
operator. Children should be adequately supervised to 
ensure they do not play with the product.

 

Stay alert, watch what you are doing, and use common 
sense when operating the product. Do not operate the 
product while tired or under the influence of drugs, 
alcohol, or medication. A lapse in concentration while 
operating the product may result in serious personal 
injury.

 

Wear heavy, long trousers, long sleeves, sturdy anti-
slip footwear. Do not wear short trousers, sandals, or 
go barefoot. Avoid wearing clothing that is loose fitting 
or that has hanging cords or ties.

 

Always wear safety glasses with side shields. 

 

Always be sure of your footing. Keep firm footing and 
balance. Walk, never run.

 

Use the product across the face of slopes, never up 
and down. Exercise extreme caution when changing 
direction on slopes.

 

Do not use the product near drop-offs, ditches, 
excessively steep slopes, or embankments. Poor 
footing could cause a slip and fall accident.

WORK AREA SAFETY 

 

Never use product while people, especially children, or 
pets are within 15 m because of the danger of objects 
being thrown by contact with the blade.

 

Objects struck by the lawn mower blade can cause 
severe injuries to persons. Thoroughly inspect the area 
where the product is to be used and remove all rocks, 
sticks, metal, wire, bones, toys, or other foreign objects. 

Remember, string or wire may entangle with the cutting 
means.

 

Always use the product in the daylight or in good 
artificial light.

 

Do not operate the product in explosive atmospheres, 
such as in the presence of flammable liquids, gases or 
dust. The product creates sparks which may ignite the 
dust or fumes.

 

Do not operate the product in wet grass or in the rain.

 

Do not use the lawn mower when there is a risk of 
lightning.

 

Keep in mind that the operator or user is responsible 
for accidents or hazards occurring to other people or 
their property.

 

Tragic accidents can occur if the operator is not alert to 
the presence of children. Children are often attracted to 
the product and the mowing activity. Never assume that 
children will remain where you last saw them.

 

Keep children out of the mowing area and under the 
watchful care of a responsible adult other than the 
operator, be alert and turn the product off if a child 
enters the area.

 

Use extra care when approaching blind corners, 
shrubs, trees, or other objects including overhanging 
shrubs, which may block your view.

ELECTRICAL SAFETY

 

Power plugs must match the outlet. Never modify the 
plug in any way. Do not use any adapter plugs with 
earthed (grounded) power tools. Unmodified plugs and 
matching outlets will reduce risk of electric shock.

 

Avoid unintentional starting. Always check that the 
switch is in off position before plugging in the product 
to the power supply. Do not carry a plugged-in product 
with your finger on the switch.

 

Avoid body contact with earthed or grounded surfaces, 
such as pipes, radiators, ranges and refrigerators. 
There is an increased risk of electric shock if your body 
is earthed or grounded.

 

Do not expose the product to rain or wet conditions. 
Water entering the product will increase the risk of 
electric shock.

 

Electrical power should be supplied via a residual 
current device (RCD) with a tripping current of not more 
than 30 mA.

 

Before use, check the supply and extension cord 
for signs of damage or aging. If the cord becomes 
damaged during use, disconnect the cord from the 
supply immediately. 

Do not touch the cord before 

disconnecting the supply.

 Do not use the product if 

the cord is damaged or worn.

 

If you need to use an extension cord, ensure it is suitable 
for outdoor use and has a current capacity rating 
sufficient to supply your product. Check it before every 
use for damage, always uncoil it during use because 
coiled cords can overheat. Damaged extension cords 
should not be repaired, they should be replaced with 
an equivalent type. 

 

Make sure the power cord is positioned so that it 
cannot be damaged by the cutting means and will not 
be stepped on, tripped over or otherwise subjected to 
damage or stress.

 

Never pick up or carry the product by the electric cable. 

1

Summary of Contents for RLM18E40H

























Reviews: