Ryobi RJ150V, Owner'S Operating Manual

Page: 5 / 12

Page 5
UNPACKING
Your saw has been shipped completely assembled and
ready for use. Inspect it carefully to make sure no breakage
or damage has occurred during shipping. If any parts are
damaged or missing, contact your nearest Ryobi dealer to
obtain replacement parts before attempting to operate saw.
An owner's operating manual and warranty registration are
also included.
KNOW YOUR RECIPROCATING SAW
Before attempting to use your saw, familiarize yourself with all
operating features and safety requirements.
See Figure 1.
OPERATION
ALLEN WRENCH HOLDER
A convenient feature on your saw is an allen wrench holder.
It is located on the bottom portion of your saw's handle. It is
ELECTRICAL CONNECTION
Your saw has a precision built Ryobi electric motor. It should
be connected to a power supply that is 120 volts, 60 Hz, AC
only (normal household current). Do not operate this tool
on direct current (DC). A voltage drop of more than 10 percent
will cause a loss of power and the motor will overheat. If your
tool does not operate when plugged into an outlet, double-
check the power supply.
Fig. 1
TRIGGER
BLADE
CLAMP
SCREW
FLAT HEAD SCREW
(FOR FLUSH CUTTING)
BASE
ASSEMBLY
VARIABLE SPEED
CONTROL SELECTOR
LOCK-ON
BUTTON
ALLEN WRENCH
ALLEN
WRENCH HOLDER
SET SCREW
(SECURES BASE ASSEMBLY)
BLADE
CLAMP
BLADE
TO ROTATE BASE
ASSEMBLY DOWN
TO ROTATE BASE
ASSEMBLY UP
convenient for storing allen wrench when not in use. See
Figure 1.
PIN