Ryobi RJ150V-01, Operator'S Manual

Page: 5 / 14

Page 5
UNPACKING
Your saw has been shipped completely assembled and
ready for use. Inspect it carefully to make sure no breakage
or damage has occurred during shipping. If any parts are
damaged or missing, contact your nearest Ryobi dealer to
obtain replacement parts before attempting to operate saw.
An operator's manual and warranty registration are also
included.
KNOW YOUR RECIPROCATING SAW
Before attempting to use your saw, familiarize yourself with all
operating features and safety requirements.
See Figure 1.
ELECTRICAL CONNECTION
Your saw has a precision built electric motor. It should be
connected to a power supply that is 120 volts, 60 Hz, AC
only (normal household current). Do not operate this tool
on direct current (DC). A substantial voltage drop will cause
a loss of power and the motor will over heat. If your tool does
not operate when plugged into an outlet, double-check the
power supply.
Fig. 1
TRIGGER
BLADE
CLAMP
SCREW
FLAT HEAD SCREW
(FOR FLUSH CUTTING)
BASE
ASSEMBLY
VARIABLE SPEED
CONTROL SELECTOR
LOCK-ON
BUTTON
ALLEN WRENCH
ALLEN
WRENCH HOLDER
SET SCREW
(SECURES BASE ASSEMBLY)
BLADE
CLAMP
BLADE
TO ROTATE BASE
ASSEMBLY DOWN
TO ROTATE BASE
ASSEMBLY UP
PIN
ALLEN WRENCH HOLDER
A convenient feature on your saw is an allen wrench holder.
It is located on the bottom portion of your saw's handle. It is convenient for storing allen wrench when not in use. See
Figure 1.
OPERATION
BLADE
CLAMP HOLE