6
ENGLISH
LOCK-OFF BUTTON
The lock-off button reduces the possibility of accidental
starting.
SPRING ASSIST FRONT WHEEL
The spring assist front wheel allows the user to
determine the depth of the edger blade.
TELESCOPING SHAFT
The shaft can be adjusted to different lengths for ease
of use.
WHEELS
The front wheel and rear wheels are designed to fit
snugly on top of curbs for improved edging.
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
Inspect the product carefully to make sure no
breakage damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
WARNING:
If any parts are damaged or missing, do not
operate this product until the parts are replaced.
Failure to heed this warning could result in
serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
CONNECTING THE POLES
See Figure 2.
Before using the edger, a one-time assembly is
required. When removed from the box, the two poles are
connected by an electrical cord as shown on figure page.
Remove packaging material from the cord and
discard.
Slide the handle pole into the lower powerhead pole
end until you hear the button click. The tubes are egg-
shaped and will only install one way.
Lower the collar on the handle pole end to the
threaded base on the power head pole end and rotate
clockwise to secure.
NOTE:
Handle pole and powerhead pole should not
be able to separate from each other once assembled
correctly. Repeat above steps if poles can be
separated.
DANGER:
Failure to lock the powerhead pole as directed
above could result in serious injury or death.
OPERATION
WARNING:
Do not allow familiarity with this product to make
you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses
with side shields when operating power tools.
Failure to do so could result in objects being
thrown into your eyes, resulting in possible
serious injury.
WARNING:
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories
not recommended can result in serious personal
injury.
APPLICATIONS
You may use this product for the purpose listed below:
Edging around walkways, driveways, curbs and
flower beds.
Trenching.
CONNECTING TO POWER SUPPLY
See Figure 3.
This product is designed with a cord retainer that
prevents the extension cord from being pulled loose.
Form a loop with the end of the extension cord.
Insert the loop portion of the extension cord through
the opening at the bottom of the rear handle and
place over cord retainer.
Slowly pull the loop against the cord retainer until the
slack is removed.
Plug the product into the extension cord.
NOTE:
Failure to remove all excess cord slack
from the extension cord retainer could result in plug
loosening from receptacle.
