22
English (Original Instructions)
one working area to the next), always apply the brake
so that the product is blocked (preferably switch off
the product as well).
n
Never carry or transport the product while it is
running.
n
When transporting the chainsaw, use the appropriate
guide bar scabbard.
n
To prevent the leakage of fuel or oil and damage in
general, secure the product when it is transported.
Check the fuel and chain lubricant tanks for leaks
Ideally you should drain the tanks prior to transport.
STORING THE PRODUCT
n
Clean all foreign material from the product. Store it in
a well-ventilated place that is inaccessible to children.
Keep away from corrosive agents such as garden
chemicals and de-icing salts.
n
Observe local regulations for the safe storage and
handling of petrol.
When storing 1 month or longer:
n
Drain all fuel from tank into a container approved for
petrol.
n
Run the engine until it stops. This will remove all
fuel-lubricant mix that could become stale and leave
varnish and gum in the fuel system.
n
Squeeze primer bulb several times to purge fuel from
carburettor.
n
Drain all bar and chain lubricant from tank into a
container approved for lubricant.
n
Always place the scabbard over the guide bar and
chain before transporting or storing the unit.
MAINTENANCE SCHEDULE
Fuel mixture level . . . . . . . . . . . . . . . . . .Before each use
Bar lubrication. . . . . . . . . . . . . . . . . . . . .Before each use
Chain tension . . . . . . . . . . . . . . . . . . . . .Before each use
Chain engagement
(no chain movement at idling speed) . . .Before each use
Chain sharpness. . . . . . . . . . . . . . . . . . .Before each use
For damaged parts . . . . . . . . . . . . . . . . .Before each use
For loose fasteners. . . . . . . . . . . . . . . . .Before each use
For loose parts . . . . . . . . . . . . . . . . . . . .Before each use
Chain brake function. . . . . . . . . . . . . . . .Before each use
For fuel leaks . . . . . . . . . . . . . . . . . . . . .Before each use
Inspect and Clean:
Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Before each use
Complete saw. . . . . . . . . . . . . . . . . . . . . . After each use
Air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . Every 5 hours*
Chain brake . . . . . . . . . . . . . . . . . . . . . . . Every 5 hours*
Replace spark plug
. . . . . . . . . . . . . . . . . . . . . . . .Yearly
Replace fuel filter
. . . . . . . . . . . . . . . . . . . . . . . . .Yearly
* Hours of Operation
Inspection after dropping or other impacts
Thoroughly inspect the product and identify any
affections or damage with the unit. Any part that is
damaged should be properly repaired or replaced by an
authorized service centre.
n
For fuel or chain lubrication leaks
n
Chain brake function
n
Chain tension
n
For damaged, loose or broken parts
n
For loose or damaged fasteners
n
Handles and hand guards
