background image

8

FEATURES

PROdUCT SPECIFICATIOnS

Engine displacement  ................................................................................................................................................... 25.4cc
Maximum engine performance  .................................................................................................................................... 0.9kW
Cultivating depth  .........................................................................................................................................................19.8cm
Tine diameter ................................................................................................................................................................. 20cm
Tine speed  ............................................................................................................................................................... 54RPM
Tilling width  ................................................................................................................................................................ 25.8cm
Net weight ....................................................................................................................................................................13.6kg

KnOW YOUR CULTIVATOR

( Fig 1).

Before attempting to use this product, familiarize yourself 

with all operating features and safety rules.

EngInE SWITCh

The engine switch (2) controls the ignition system. The switch 

must be in the ON ( 

) position for the engine to start and run. 

To stop, place the switch in the OFF ( 

O

 ) position.

JUST Add SAnd

Putting sand in the sand tank allows greater stability when 

operating the cultivator, and also gives added weight to the 

machine, allowing it to cultivate with less effort and vibration.

RECOIL STARTER

The recoil starter (3) is used for starting the engine

.

PRIMER BULB

The  primer  bulb  (7)  pumps  fuel  from  the  fuel  tank  to  the 

 carburetor. This is necessary only when starting a cold engine 

or after refueling an engine that has run out of fuel. 

START LEVER

The start lever (4) opens and closes the choke valve in the 

carburetor. The 

START 

position enriches the fuel mixture 

for starting a cold engine. The 

RUn 

position provides the 

correct fuel mixture for normal operation after starting, or for 

restarting a warm engine.

ThROTTLE LEVER

The throttle lever (1) controls the rotation speed of the tines. 

Completely engage the throttle lever while cultivating.

WARnIng: 

If any parts are missing do not operate this tool until the 

missing parts are replaced. Failure to heed this warning 

could result in possible serious personal injury.

WARnIng: 

Do not attempt to modify this tool or create accessories not 

recommended for use with this tool. Any such alteration 

or modification is misuse and could result in a hazardous 

condition leading to possible serious personal injury.

WARnIng:

To prevent accidental starting that could cause serious 

personal injury, always disconnect the engine spark plug 

wire from the spark plug when assembling parts.

POSITIOnIng ThE hAndLEBAR 

( Fig 2 ).

n

  Loosen the two handlebar knobs (14) .

n

  Unfold the handlebar (13) into operating position.

 

nOTE: 

Do not use force. If there is binding, continue to 

loosen the knobs. Do not allow throttle cable to become 

pinched when raising the handlebar.

UnPACKIng

This product requires assembly.

n

  Carefully remove the tool and any accessories from the 

box. Make sure that all items listed in the packing list are 

included.

n

  Inspect the tool carefully to make sure no breakage or 

damage occurred during shipping.

n

  Do not discard the packing material until you have carefully 

inspected and satisfactorily operated the tool.

PACKIng LIST

Cultivator
Drag Bar
Pull Pin
Hitch Pins (2)
Felt Washers (2)
Inner Tines (2)
Outer Tines (2)
Ryobi Exact Mix 2-stroke Oil
Wheel Assembly (Accessory)
Operator’s Manual

ASSEMBLY

Summary of Contents for RCP254
















Reviews: