background image

9  

immediately.

The fuel cap contains a sealing gasket and a check valve 
to allow air in. A clogged check valve will cause poor engine 
performance. If performance improves when the fuel cap is 
loosened, the check valve may be faulty. Replace fuel cap 
if required.

FUEL FILTER

7KH IXHO VXSSOLHG WR WKH HQJLQH LV SDVVHG WKURXJK D ¿OWHU

to remove any contaminants from entering the engine. 
Contaminants in the fuel can cause poor performance and 
damage to the engine.

7KHIXHO¿OWHULVDQRQVHUYLFHDEOHLWHPDQGLIQHHGHGVKRXOG

be replaced by an authorised service centre.

SPARK PLUG REPLACEMENT

See Figure 14.

This engine uses a Champion RCJ-6Y or NGK BPMR7A 
spark plug with .025 in. electrode gap. Use an exact 
replacement and replace annually.
Follow these steps to replace the spark plug:

1.  Remove the spark plug boot.
2.  Loosen the spark plug by turning it counterclockwise 

with a 16 mm socket.

3.  Remove the spark plug.
4.  Hand thread the new spark plug, turning it clockwise.

NOTE:

 A small amount of anti seize compound on the thread 

of the new plug will ensure easy removal on the next service.
5.  Tighten with a socket. Do not overtighten.

 WARNING:

Be careful not to cross-thread the spark plug. Cross-threading 
will seriously damage the product.

STORING THE PRODUCT

„

Clean all foreign material from the product. Store idle unit 
indoors in a dry, well-ventilated area that is inaccessible 
to children. Keep away from corrosive agents such as 
garden chemicals and de-icing salts.

„

Abide by all ISO and local regulations for the safe storage 
and handling of petrol. 

WHEN STORING 1 MONTH OR LONGER:

„

Drain all fuel from tank into a container approved for petrol. 
Run engine until it stops.

You can often make adjustments and repairs described here. 
For other repairs, have the blower/vacuum serviced by an 
authorized service dealer.

CLEANING THE AIR FILTER

See Figure 12 - 13.

A dirty air filter will cause starting difficulty, loss of 
performance, and shorten the life span of the engine. Check 

WKHDLU¿OWHUPRQWKO\)RUEHVWSHUIRUPDQFHUHSODFHWKHDLU
¿OWHUDWOHDVWRQFHD\HDU

„

Loosen the air filter cover by turning the knob 
counterclockwise.

„

5HPRYHWKHDLU¿OWHU

„

&OHDQ WKH IRDP ¿OWHU HOHPHQW ZLWK ZDUP VRDS\ ZDWHU

Rinse and let dry.

 

NOTE:

,IWKHIRDP¿OWHUHOHPHQWLVGDPDJHGLWVKRXOGEH

replaced.

„

$SSO\DOLJKWFRDWRIHQJLQHRLOWRWKHIRDP¿OWHUHOHPHQW

then squeeze it out.

„

5HLQVWDOOWKHDLU¿OWHU

 

NOTE:

0DNHVXUHWKH¿OWHULVVHDWHGSURSHUO\LQVLGHWKH

FRYHU,QVWDOOLQJWKH¿OWHULQFRUUHFWO\ZLOODOORZGLUWWRHQWHU

the engine, causing rapid engine wear. 

„

Reinstall the cover and tighten knob to secure.

CLEANING THE EXHAUST PORT, MUFFLER AND 
SPARK ARRESTOR

NOTE: 

Depending on the type of fuel used, the type and 

amount of lubricant used, and/or your operating conditions, the  

H[KDXVW SRUW PXIÀHU DQGRU VSDUN DUUHVWRU VFUHHQ PD\

become blocked with carbon deposits. If you notice a power 
loss with your petrol powered product, you may need to 
remove these deposits to restore performance. We highly 

UHFRPPHQGWKDWRQO\TXDOL¿HGVHUYLFHWHFKQLFLDQVSHUIRUP

this service.
The spark arrestor must be cleaned or replaced every 50 
hours or yearly to ensure proper performance of your product. 
Spark arrestors may be in different locations depending on 
the model purchased. Please contact your nearest service 
dealer for the location of the spark arrestor for your model.

 WARNING:

7R DYRLG D ¿UH KD]DUG QHYHU UXQ WKH EORZHUYDFXXP

without the spark arrestor in place.

VACUUM BAG

A dirty bag will reduce performance. To clean the bag, turn it 
inside out and shake. Wash the bag in soapy water at least 
once a year. To obtain a replacement bag, see your local 
Ryobi dealer. Visit our website for your nearest location or 
call Ryobi Customer Service on 1300 361 505.

FUEL CAP

 WARNING:

$OHDNLQJIXHOFDSLVD¿UHKD]DUGDQGPXVWEHUHSODFHG

Summary of Contents for RBV26GN













Reviews: