background image

4  

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper 

interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL

NAME

DESIGNATION/EXPLANATION

Safety alert symbol

Indicates a potential personal injury hazard.

 

Read the operator’s manual

To reduce the risk of injury, user must read and understand 

operator’s manual before using this product.

Regulatory Compliance Mark (RCM). This product meets 

applicable regulatory requirements.

Wear eye protection.

Wear ear protection.

Do not operate without tubes in place.

Long hair

Risk of long hair being drawn into air inlet.

Loose clothing

Risk of loose clothing being drawn into air intake.

Rotating fans. Keep hands and feet out of openings while 

the machine is running.

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL

SIGNAL

MEANING

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will result in 

death or serious injury.

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could result in 

death or serious injury.

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may result in 

minor or moderate injury. 

CAUTION:

(Without Safety Alert Symbol) Indicates a situation that may result in property 

damage.

Summary of Contents for RBV26G













Reviews: