background image

 

Before cleaning, repairing, or inspecting, shut off the 

engine and make certain all moving parts have stopped. 

Disconnect the spark plug wire, and keep the wire away 

from the plug to prevent accidental starting.

 

Service on the blower/vacuum must be performed by 

qualified repair personnel only. Service or maintenance 

performed by unqualified personnel could result in injury 

to the user or damage to the product.

 

Use only identical replacement parts when servicing the 

blower/vacuum. Use of unauthorized parts may create a 

risk of serious injury to the user, or damage to the  product.

 

Do not use on a ladder, rooftop, tree, or other unstable 

support. Stable footing on a solid surface enables better 

control of the blower/vacuum in unexpected situations.

  Always hold the blower/vacuum in your right hand during 

blower operation. Refer to the 

OPERATION

 instructions 

later in this manual for proper position during vacuum 

operation and additional information.

  To reduce the risk of hearing loss associated with sound 

level(s), hearing protection is required.

  To  reduce  the  risk  of  injury  associated  with  contacting 

 

rotating parts, stop the engine before installing or  

removing attachments. Do not operate without guard(s) 

in place. Always disconnect the spark plug before  

performing maintenance or accessing any movable parts.

 

Do not point the blower nozzle in the direction of people 

or pets.

  Never run the unit without the blower tubes installed.

  Never place objects inside the blower tubes.

  Use only as directed in this operator’s manual.

  Do not operate vacuum without vacuum bag installed; 

flying  debris  could  cause  serious  injury.  Always  close 

vacuum bag completely before operating.

  Rotating impeller blades can cause severe injury. Stop 

the engine and ensure impeller blades have stopped 

rotating before opening the vacuum door or installing/ 

changing tubes. Do not put hands or any other object into 

the vacuum tubes while they are installed on the unit.

  Never run the unit without the proper equipment attached. 

When used as a blower, always install the blower tubes. 

When used as a vacuum, always install the vacuum tubes 

and vacuum bag. Make sure the vacuum bag is completely 

zipped when the unit is running to avoid flying debris.

  Avoid situations that could catch the vacuum bag on fire. 

Do not operate near an open flame. Do not vacuum warm 

ash from fireplaces, barbecue pits, brush piles, etc. Do not 

vacuum discarded cigars or cigarettes unless the cinders 

are completely cool.

SPECIFIC SAFETY RULES

FUELING

 

Fuel is highly flammable. Take precautions when using 

to reduce the chance of serious personal injury.

 

Store fuel in a cool, well-ventilated area, safely away from 

INTRODUCTION

This product has many features for making its use 

more  pleasant  and  enjoyable.  Safety,  performance,  and 

dependability have been given top priority in the design of 

this product making it easy to maintain and operate.

GENERAL SAFETY RULES

 WARNING:

Read and understand all instructions. 

Failure to follow 

all instructions listed below may result in electric shock, fire 

and/or carbon monoxide poisoning which will can cause 

death or serious personal injury.

 Do not allow children or untrained individuals to use this 

unit.

  Never start or run the engine inside a closed area; breathing 

exhaust fumes can kill.

  Always wear eye protection with side shields marked to 

comply with standards, along with hearing protection.  

Failure to do so could result in objects being thrown into 

your eyes and other possible serious injuries.

  Keep all bystanders, children, and pets at least 15m  away.

  Wear heavy long pants, long sleeves, boots, and gloves. 

Do not wear any loose-fitting clothing, short pants, 

sandals, loose fitting jewelry of any kind, or go barefoot.

  To reduce the risk of injury associated with objects being 

drawn into rotating parts, do not wear loose clothing, 

scarves, neck chains, and the like. Secure long hair so it 

is above shoulder level to prevent entanglement in any 

rotating parts.

  Do not operate this unit when you are tired, ill, or under 

the influence of alcohol, drugs, or medication.

  Do not operate in poor lighting.

  Keep all parts of your body away from any moving parts 

and all hot surfaces of the unit.

  Wear a face filter mask in dusty conditions to reduce the 

risk of injury associated with the inhalation of dust.

  Check the work area before each use. Remove all objects 

such as rocks, broken glass, nails, wire, or string which 

can be thrown or become entangled in the machine.

 

Keep  firm  footing  and  balance.  Do  not  overreach. 

Overreaching can result in loss of balance or exposure 

to hot surfaces.

 

Never operate the unit without a spark arrestor screen; 

this screen is located inside the muffler.

  Before storing the unit, allow the engine to cool.

  Use only Ryobi replacement parts and accessories. Failure 

to do so may cause poor performance or possible injury.

 Maintain the unit per maintenance instructions in this 

operator’s manual.

  Inspect the unit before each use for loose fasteners, fuel 

leaks, etc. Replace damaged parts.

Summary of Contents for RBV26G













Reviews: