1
English
1
English
1
English
GENERAL SAFETY RULES
WARNING
Read and understand all instructions. Failure to
follow the warnings and instructions may result in
electric shock, fire and serious injury.
Save all warnings and instructions for future
reference
1) Training
Read the instructions carefully. Be familiar with the
controls and the proper use of the appliance.
Never allow children to use the appliance.
Never allow people unfamiliar with these instructions
to use the appliance. Local regulations may restrict the
age of the operator
The operator or user is responsible for accidents or
hazards occurring to other people or their property.
2) Preparation
While operating the appliance, always wear substantial
footwear and long trousers.
Do not wear loose clothing or jewellery that can be
drawn into the air inlet. Keep long hair away from the
air inlets
.
Wear protective goggles while operating.
To prevent dust irritation the wearing of a face mask
is recommended.
Before using, check the supply and extension cord for
signs of damage and aging. Do not use the appliance
if the cord is damaged or worn.
Never operate the appliance with defective guards or
shields, or without safety devices, for example debris
collector in place.
Only use a weather proof extension cord fitted with
coupler according to IEC 60320-2-3.
3) Operation
Always direct the cord to the rear away from the
appliance.
If a cord becomes damaged during use, disconnect
the supply cord from the mains immediately. Do not
touch the cord before disconnecting the supply.
Do not carry the appliance by the cord.
Disconnect the appliance from the mains supply
y
whenever you leave the machine;
y
before clearing a blockage;
y
before checking, cleaning or working on the
appliance;
y
if the appliance starts to vibrate abnormally.
Operate the appliance only in daylight or in good
artificial light.
Do not overreach and keep your balance at all times.
Always be sure of your footing on slopes.
Walk, never run.
Keep all cooling air inlets clear of debris.
Never blow debris in the direction of bystanders.
4) Maintenance and storage
Keep all nuts, bolts and screws tight to be sure the
appliance is in safe working condition.
Check the debris collector frequently for wear or
deterioration.
Replace worn or damaged parts.
Use only genuine replacement parts and accessories.
Store the appliance only in a dry place.
The blower/vacuum should be used with a Residual
Current Device (RCD) with a tripping current of not more
than 30mA.