Ryobi RBL26G, Original Instructions Manual, Page: 10 / 32

10
Warning! Hot surface.
Beware of thrown or flying
objects. Keep all bystanders,
especially children and pets,
at least 15 m away from the
operating area.
Do not run unit without tubes
in place.
Risk of long hair being drawn
into air inlet.
Risk of loose clothing being
drawn into air intake.
To reduce the risk of injury or
damage, avoid contact with
any hot surface.
Beware of rotating fans.
Keep hands and feet out of
openings while the product is
running.
Use unleaded petrol intended
for motor vehicle use with an
octane rating of 91 or higher.
Use 2-stroke oil for air cooled
engines.
Mix the fuel mix thoroughly
and also each time before
refuelling.
To stop the product, press the
switch to the “STOP” position.
Set throttle.
Press the primer bulb.
Pull the starter grip.
Run the engine at full throttle
for 10 seconds.
Full choke position.
Half choke position.
Run position.
Per ANSI B175.2
Blower mode: [79.8 dB(A)]
Vacuum mode:[79.2 dB(A)]
The bystander sound level is 79.8
dB(A) for blower mode, and 79.2 dB(A)
for vacuum mode per ANSI B175.2.
R e g u l a t o r y C o m p l i a n c e
Mark (RCM). The product
meets applicable regulatory
requirements.
Take off blower tube from
housing.
Waste electrical products
should not be disposed of
with household waste. Please
recycle where facilities exist.
Check with your local authority
or retailer for recycling advice.
SYMBOLS IN THIS MANUAL
Note
Warning
Parts or accessories are sold
separately