background image

SYMBOLS

SERVICE

Servicing  requires  extreme  care  and  knowledge 

and  should  be  performed  only  by  a  qualified  service 

technician. For service we suggest you return the product 

to  your  nearest 

AUTHORISED  SERVICE  CENTER

  for 

repair.  When  servicing,  use  only  identical  replacement 

parts.

SAVE THESE INSTRUCTIONS

The following signal words and meanings are intended to explain the levels of risk associated with this product. 

 SYMBOLS 

NAME 

EXPLANATION

DANGER 

Indicates  an  imminently  hazardous  situation,  which,  if  not 
avoided, will result in death or serious injury.

WARNING

 

Indicates  a  potentially  hazardous  situation,  which,  if  not 
avoided, could result in death or serious injury.

CAUTION 

Indicates  a  potentially  hazardous  situation,  which,  if  not 
avoided, may result in minor or moderate injury. 

CAUTION 

(Without Safety Alert Symbol) Indicates a situation that may 
result in property damage.

 

WARNING

 To  avoid  serious  personal  injury,  do  not  attempt 

to use this product until you read thoroughly and 

understand  completely  the  operator’s  manual. 

Save this operator’s manual and review frequently 

for  continuing  safe  operation  and  instructing 

others who may use this product.

Summary of Contents for RBC30SESA



























Reviews: