background image

TROUBLESHOOTING

PROBLEM 

POSSIBLE CAUSE 

SOLUTION

IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORISED SERVICE DEALER.

1.  Clean threads and lubricate with grease - if 

no improvement, replace the spool retainer.

1.  Cut tall grass from the top down to prevent 

wrapping. 

.  Operate trimmer at full throttle.

Spool retainer hard to turn

G r a s s   w r a p s   a r o u n d 

driveshaft housing and string 

head

1.  Screw  threads  are  dirty  or 

damaged.

1.  Cutting  tall  grass  at  ground 

level.

.  Operating  trimmer  at  part 

throttle.

EMISSIONS MAINTENANCE SCHEDULE AND  WARRANTED PARTS LIST

Emissions Parts 

Inspect Before  

Clean Every 

Replace  

Clean Every 

Replace Every 

 

Each Use 

5 Hours 

Every 25 Hours   

25 Hours  

50 Hours 

 

 

 

or Yearly 

or Yearly

CATALYTIC MUFFLER ASSEMBLY

 ................................................................................................................... X

AIR FILTER ASSY

  includes:

  Filter Screen ..................................................... X

SPARK SCREEN

 ................................................................................................................................................X

CARBURETOR ASSY

  includes:

  Heat Dam ........................ X

  Gaskets ........................... X

FUEL TANK ASSY

  includes:

  Fuel Lines ........................ X

  Fuel Cap .......................... X

  Fuel Filter

IGNITION ASSY

  includes:

  Spark Plug ........................................................................................ X
ALL EMISSIONS-RELATED PARTS ARE WARRANTED FOR TWO YEARS OR FOR THE PERIOD OF TIME PRIOR 

TO THE PARTS FIRST SCHEDULED REPLACEMENT WHICHEVER COMES FIRST.

THIS PRODUCT WAS MANUFACTURED WITH A CATALYST MUFFLER

Congratulations! 

You have made an investment toward protecting the environment. In order to maintain this product’s 

original emission level, please refer to the maintenance section below.

WARRANTY

Summary of Contents for RBC30SESA



























Reviews: