background image

2

SYMBOLS

The following symbols are located on labels on the 

attachment shaft. Please study them and learn their 

meaning.  Proper interpretation of these symbols will allow 

you to operate the tool better and safer. 

SYMBOL DESIGNATION/EXPLANATION

Safety alert

Read  the  operatorʼs  manual  before 

starting or operating this product. Failure 

to follow operating instructions and safety 

precautions in the operatorʼs manual can 

result in serious injury.
Thrown objects can cause severe 

eye injury. Wear eye protection when 

operating this product.

Wear hearing protection during extended 

periods of operation.

Beware of thrown or flying objects. Keep 

all bystanders at least 15 m away.

Tri-ArcTM blade is appropriate for this 

unit and is suited for cutting pulpy weeds 

and vines.

This unit is not intended for use with a 

toothed saw type blade.

Blade thrust may occur without warning.

Rotational direction and maximum speed 

of the shaft for the cutting attachment.

Wear non-slip safety footwear when 

using this equipment.

Wear non-slip, heavy-duty gloves.

Use unleaded petrol intended for motor 

vehicle use with an octane rating of 91 

[(R + M)/2] or higher.

Use 2-stroke oil for air cooled engines.

Mix the fuel mix thoroughly and also each 

time before refueling

Risk of getting cut. Operate carefully.

113

83

Guaranteed sound pressure and sound 

power lever.

Regulatory Compliance Mark (RCM). 

This product meets applicable regulatory 

requirements.

Full choke position

Run choke position

Set switch to "ON"

Push primer bulb

Squeeze throttle and pull starter grip

The following signal words and meanings are intended 

to explain the levels of risk associated with this product.

SYMBOL SIGNAL

MEANING

DANGER:

Indicates an imminently 

hazardous situation, which, if not 

avoided, will result in death or 

serious injury.

WARNING:

Indicates a potentially hazardous 

situation, which, if not avoided, 

could result in death or serious 

injury.

CAUTION:

Indicates a potentially hazardous 

situation, which, if not avoided, 

may result in minor or moderate 

injury.

CAUTION:

(Without Safety Alert Symbol) 

Indicates a situation that may 

result in property damage.

Summary of Contents for RBC254FSDSN













Reviews: