5
wARNING
To prevent serious personal injury from product failure,
Do not use damaged equipment. If abnormal noise,
vibration or air leak occurs, stop using the product and
have the product inspected and corrected before use.
■
Keep the product safe by regular maintenance.
Maintenance shall be performed weekly.
■
Before each use, check for loose screws, misalignment,
or binding of moving parts, clogged nozzle, damaged
supply hose, cracked or broken parts, and any other
condition which may affect safe operation. Do not use
damaged equipment.
■
After each use, clean the external surfaces with a
clean cloth. Do not use solvents or immerse in liquid
as doing so will damage the product.
■
Store the product in a dry, secure location out of reach
of children.
■
Drain the air tank daily. Water in the air line will
damage the product.
■
If the product cannot be used anymore, make sure to
dispose of it so as not to impose hazards on people
and the environment.
■
Clean the air inlet mesh on the sand blasting gun and
clean the compressor inlet filter weekly.
wARNING
For greater safety and reliability, all repairs should be
performed by an authorised service centre.
SyMBOLS
Safety alert
CE conformity
Please read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Please read the instructions carefully before
starting the product.
Wear eye protection.
Wear ear protection.
Wear safety gloves
Wear EN ISO 14877 approved type 3
abrasive blasting clothing.
WARNING! The abrasive blasting clothing
is a part of an abrasive blasting combination
and shall only be used when correctly fitted to
the respiratory protective devices.
Wear a safety mask.
20180404v1
