Ryobi RA-MSS20-B, Operator'S Manual

Page: 6 / 12

3
Wear eye protection.
Wear ear protection.
Lubricate with air tool oil daily.
SpEcIfIcAtIONS
Avg. air consumption 114 L/min (4 cfm)
Maximum material thickness 1.2 mm (20 gauge)
Maximum working pressure 6.3 bar (90 psi)
Weight 1.11 kg
Air inlet size 6.35 mm (1/4”)
Air hose ID 9.52 mm (3/8”)
A-weighted sound pressure
level
90.4dB(A), k=3dB
Sound power level 101.4dB(A), k=3dB
Vibration value 2.5 m/s
2
Uncertainty 0.45 m/s 2
Noise emission values are in accordance with
EN ISO 4871 and EN ISO 15744.
Vibration emission values are in accordance with
EN12096 and EN28662-1.
AppLIcAtION
The product is ideal for cutting. It features a hardened
steel barrel and piston for less wear and longer life. It
has a lightweight aluminium pistol-grip housing and rear
exhaust. Any other use is forbidden.
The product is mainly used for shearing different types of
plastics and all types of aluminum, tin and steel.
– Heavy-duty shear head provides a long life and
reliable cutting
– Lightweight composite material housing
– Soft grip for extra comfort and control
RESIDUAL RISkS
Even if you are operating this product in accordance
with all the safety requirements, potential risks of injury
and damage remain. The following dangers can arise in
connection with the structure and design of this product:
1. Health defects resulting from vibration and noise
emission if the product is being used over long periods
of time or not adequately managed and properly
maintained.
2. Injuries and damage to property due to broken cutting
attachments or the sudden impact of hidden objects
during use.
3. Danger of injury and property damage caused by
flying objects.
AIR SUppLy AND OpERAtION
■ Ensure the air valve (or trigger) is in the “off” position
before connecting to the air supply.
■ Connect the product to the air hose.
■ Press the trigger to operate the product.
■ Do not use any additional force upon the product.
■ Do not allow the product to free run for an extended
period of time as this will shorten its life.
■ Always ensure that the accessories such as blades,
discs, sockets, etc. are rated/designed for use with the
machine. Also correctly and securely fastened before
connecting the machine to the air supply.
■ Release the start and stop device in the case of an
interruption of the power supply.
■ Disconnect the product from the power source before
changing accessories or making adjustments.
■ Required air pressure of 6.3 bar (90 psi), and an air
flow according to specifications.
WARNINg
Ensure the air supply is clean and does not exceed
6.3 bar (90 psi) while operating the product. Too high an
air pressure and unclean air will shorten the product's
life due to excessive wear, and may be dangerous
causing damage and/or personal injury.
LUBRIcAtION
An automatic in-line filter-regulator-lubricator is
recommended (Fig. 7) as it increases product life and
keeps the product in sustained operation. The in-line
lubricator should be regularly checked and filled with air
tool oil.
Proper adjustment of the in-line lubricator is performed by
placing a sheet of paper next to the exhaust ports and
holding the throttle open for approximately 30 seconds.
The lubricator is properly set when a light stain of oil
collects on the paper. Excessive amounts of oil should be
avoided.
If it becomes necessary to store the product for an extended
period of time (overnight, weekend, etc.), it should receive
a generous amount of lubrication at that time. The product
should be run for approximately 30 seconds to ensure oil
has been evenly distributed throughout the product. The
product should be stored in a clean and dry environment.