manualshive.com logo in svg

Ryobi R2-PWWDV-G, Original Instructions Manual

Share
Download
Ryobi R2-PWWDV-G Original Instructions Manual Download Page 19

19

3.1 Unpacking

1. Unpack the appliance and all its accessories.

WARNING:

 Danger of suffocation! Small parts such as screws are delivered with the appliance. Keep 

these parts away from children at all times as children could swallow them and suffocate.

WARNING:

 Danger of suffocation! The appliance is packaged in plastic film. Keep this away from children 

at all times as children could play with it and suffocate.

2.  Check the contents for completeness and possible damage. Information regarding scope of delivery 

Chapter 1.1, “Scope of delivery“.

NOTE:

 If you notice transport damage or if parts are missing, do not assemble the appliance. Instead 

immediately contact the dealer from whom you acquired the appliance or contact our customer service.

CAUTION:

 Always transport and ship the appliance in its original packaging to avoid damage. Keep the 

packaging for this purpose. Dispose of no longer needed packaging material according to the applicable 
regulations of your country.

Unpacking And Assembling

Summary of Contents for R2-PWWDV-G


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands