![background image](http://html1.mh-extra.com/html/ryobi/r18xblv20/r18xblv20_manual_1503936008.webp)
8
Getting started
Insert the locking pin into the lock thread and turn the pin clockwise to secure the
blower/vacuum tube asssembly.
NOTE:
The red LED turns on if the product is overloaded.
Never use the blower vacuum without
connecting the lower blower and
vacuum tube.
NOTE:
To quickly disconnect the
harness from the product, pull up the
quick-release tab.
Wear full eye and ear protection,
substantial footwear, and long trousers
at all times while operating the product.
Do not operate the product when
barefoot or wearing open sandals.
Push down the selection mode lever to
select the blower function.
Push up the selection mode lever to
select the vacuum function.
Slide the guide wheel onto the lower
blower tube.
NOTE:
Use the tab on the rear side to
slide the guide wheels up or down and
adjust its position.
Attach the lower vacuum tube into the
lower blower tube until it is secured.
1
9a
9b
6
2
3