To secure the product prior to movement:
■
The product should be stored at the zero degree mitre
and bevel angle and locked in position. The slide
should be locked. The handle should be locked in the
lower (safe) position with the guards closed.
■
One or both sides of the extension bars can be removed
for ease of carrying.
To move or transport in a vehicle:
■
Secure the product prior to movement as described in
the manual.
■
Remove the product from the bench top by releasing
the 4 bolts, one at each corner. Secure the bolts for
future use. Lifting the product using the handle at the
top.
■
When lifting to a height, two persons wearing heavy
gloves are needed to lift the base of the product.
■
When transporting in a vehicle, set the product on its
base and secure against movement.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
SYMBOLS ON THE PRODUCT
Safety alert
Regulatory Compliance Mark
(RCM). Product meets applicable
regulatory requirements.
Please read the instructions carefully
before starting the machine.
Wear ear protection
Always wear eye protection.
Keep hands away from the cutting
area and sharp blade.
Do not expose to rain or use in
damp locations.
Wear safety gloves
Blade rotation direction (shown on
saw blade)
Blade rotation direction (shown on
blade guard)
Blade width of cut (Kerf)
Number of teeth on this saw blade
Cutting capacity
For cutting wood and analogous
material
Not for cutting metals
LASER
2
Laser radiation.
Do not stare into beam.
Class 2 laser product
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your Local
Authority or retailer for recycling
advice.
SYMBOLS IN THIS MANUAL
Lock
Unlock
Locking mechanism is not working
Parts or accessories sold separately
Note
Warning
The following signal words and meanings are intended to
explain the levels of risk associated with this product:
DANGER
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
(Without Safety Alert Symbol) Indicates a situation that
may result in property damage.
6
Summary of Contents for R18MS216
