Ryobi PMC1412K, Operator'S Manual

Page: 7 / 24

7 — English
PROBLEM POSSIBLE CAUSE SOLUTION
Leak at nozzle or threaded hole Nozzles were installed improperly.
Nozzles clogged or dirty. Reinstall nozzles and tighten securely.
Clean nozzles.
Misting kit will not spray Hose faucet is closed.
T-filter is clogged.
Nozzles clogged or dirty. Turn hose faucet completely on.
Follow instructions for cleaning strainer
in
Maintenance.
Clean nozzles.
Loss of pressure T-filter is clogged.
Debris in misting kit.
Leak in misting tube. Follow instructions for cleaning strainer
in
Maintenance.
Follow instructions for flushing the
system in
Assembly.
Replace misting tube.
Water stuck in misting tube after use Misting tube connected to T-filter. Disconnect misting tube from T-filter
and allow water to drain.
TROUBLESHOOTING
NOTE: ILLUSTRATIONS START ON PAGE 8 AFTER FRENCH
AND SPANISH LANGUAGE SECTIONS.